Machine polisher · sourced UK profile

FLEX XFE 7-15 150 BS

The FLEX XFE 7-15 150 BS is a 230 V free-spinning 15 mm random-orbital model tied here to order 450855. FLEX publishes 710 W input, 420 W output, a 4 m cable and two supplied cushioned hook-and-loop pads; those figures describe different parts of the machine and bundle.

Exact variantOrder 450855 · 230 V UK page

MechanismFree-spinning random orbitalMovement category comes before headline speed.

Backing pad150 mm maximum support plateConfirm the exact supplied plate and approved pads.

Orbit / stroke15 mmDo not compare unlike mechanisms by orbit alone.

Published power710 W input · 420 W outputInput and output figures remain separately labelled.

Published speed1,500–4,500 rpm · 3,000–9,000 opmMeasurement bases differ between mechanisms.

Published weight2.4 kg publishedCheck whether batteries or accessories are excluded.

Power supply230 V corded · 4 m cableVerify the regional plug, battery or adapter bundle.

Exact variantOrder 450855 · 230 V UK pageMatch this on the product and retailer evidence.

Before buying

Checks for this exact model.

These are model-specific next steps, not a generic shopping checklist.

01
Match order 450855 and EAN 4030293199781 on the UK listing, carton and invoice.
02
Verify both supplied backing-pad references 487953 and 487988 rather than inferring their size from the model name.
03
Use the 710 W consumption figure for supply planning; do not substitute the 420 W output figure.
04
Check the 4 m cable route, current FLEX warranty, service access and approved pad/liquid system for paid work.

Evidence boundary

What the published figures do not prove.

A 15 mm orbit does not make this interchangeable with another 15 mm machine that has a different plate, balance or speed range.
The no-load rpm and orbit-rate figures are separate published measures and do not prove loaded correction speed.
The 2.4 kg figure is not the transported weight of the machine, both plates, pads, liquids, cable and case.
Claims about low heat or hologram-free finishing do not remove the need for temperature checks, technique and a test spot.

Exact-model next steps

Verify first. Compare second.

Open the primary source, rerun the full category screen and only then use the exact-model Amazon UK search. Marketplace results can still show another variant or bundle.

Open the official source Run the 6-model screen Start with the category selector Check current Amazon UK results

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. The price is unchanged for you. The link is a search, not confirmation of the exact SKU, stock, price, rating or compatibility. Detailer Setup has no paid relationship with the manufacturer.

Supplier enquiry

Need the exact variant checked?

Send the model and source in one email. No payment is taken, no supplier coverage is promised and nothing is shared without your permission.

Email this model check

Primary evidence

Read the manufacturer wording.

FLEX UK official product pageFLEX XFE 7-15 150 BS — Order 450855 · 230 V UK page

Specifications and public terms can change. Recheck the exact regional variant, current manual, included bundle, warranty and retailer evidence at the time of purchase.

Common questions

FLEX XFE 7-15 150 BS FAQs

Why does the FLEX XFE show both 710 W and 420 W?

FLEX publishes 710 W power consumption and 420 W power output. Use the consumption figure when screening the electrical supply and keep the output figure labelled rather than comparing it as if it were input.

Does the 150 in the model name prove the supplied plate?

No. The UK page publishes a 150 mm maximum support-plate size and lists two supplied pad references. Confirm the exact contents and approved combinations on the current product evidence.

Is this FLEX XFE 7-15 150 BS page a purchase recommendation?

No. It is a sourced specification and setup-check profile. The exact current product, utilities, fittings, process, warranty, local rules and retailer evidence still need to be verified before purchase.